Technical Specs
WHAT’S INCLUDED
A. LED Bars
B. Power Supply
C. Mounting Brackets (2 PCS)
D. Screws
E. 8ft Power Cord
F. 15ft RJ14 Network Cable
G. Steel Hangers (2 PCS)
ENVIRONMENT
The fixture is meant for use in climate rooms. The fixture may not be used in wet environments or outdoors.
ASSEMBLY & SET UP
•Take caution when handling the LED bars. Make sure the LEDs and bars do not come in contact with sharp objects or excessive force that may cause damage to the diodes.
•We always recommend using certified or qualified installation professional to ensure optimal performance and safety.
•Unbox and unfold the fixture and place on a flush and stable surface.
SAFETY RECOMMENDATIONS AND WARNINGS
WARNING! READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE USING OR WORKING WITH THE FIXTURE
•Always adhere to local rules and regulations when installing or using the fixture.
•Best practices are to have a licensed electrician install the fixtures.
•Do not open or disassemble the fixture, it contains no serviceable parts inside. Opening or modifying the LED fixture can be dangerous and will void the warranty.
•Do not use the fixture when either the fixture or its power cord are damaged. Replace the power cord only with original certified cords.
•Always disconnect the fixture from mains before performing any maintenance.
•Always allow for a cool down period of at least 30 minutes before touching the LED bars.
•The fixture reaches temperatures of 108° F / 40° C. Do not use this fixture near anything flammable or reactive.
•The installation and the use of the fixture are the responsibility of the end user. Incorrect use or installation can lead to malfunction and failure of the fixture. Improper use of the fixture will void the warranty.
•Ensure the existing electrical can support the voltage and current requirements of the fixture.
•Ensure that your low voltage communication cables are a minimum distance of 6” from any live power supply.
•Separate your power and low voltage wires when daisy chaining your fixtures.
•Modifications to the cords can lead to unwanted electromagnetic interference and will void the warranty and nullify any compliance with legal regulations.
•Avoid coiled cords and keep mains leads separated. This prevents electromagnetic interference.
WARNING! BE SURE TO MOUNT THE FIXTURE TO SOMETHING THAT CAN HOLD THE WEIGHT OF THE FIXTURE.
In order to mount the fixture properly, start by identifying a suitable support structure you can mount the fixture on. Common support structures include pallet racks, trusses, structural channels, unistrut, and rolling tables. For optimal results, we recommend that two people mount this fixture together. Be sure to mount the system to something that can hold the weight of the fixture.
MAINTENANCE
•Do not clean the fixture with detergents, abrasives or other aggressive substances.
•Please regularly check the fixture for dust or dirt buildup. Clean if necessary. Contamination may cause overheating and decreased performance.
REGULARLY CHECK THE CABLE CONNECTIONS OF THE FIXTURE TO ENSURE IT IS UNDAMAGED.
STORAGE AND DISPOSAL
•This fixture is to be stored at an ambient temperature of to 15°C-60° F / 26°C-80° F in a dry and clean environment.
•This LED product must not be disposed of as standard waste. It is to be collected or brought to a recycling center for proper disposal and environmental treatment.
